Hasbro 84 Snack Door Inner panel for Talentcell (STL file)

Hasbro 1984 Proton Pack Snack Door Inner Panel STL

This listing is for a digital STL file only. No physical parts are included.

Upgrade the battery compartment of your Hasbro 1984 Proton Pack with this custom snack door inner panel designed for use with a 3000mAh TalentCell battery pack. This replacement panel accommodates the factory USB/BAT selector switch and provides a clean, finished appearance inside the snack door compartment.

Simply open the pack by carefully removing the motherboard assembly, remove the stock snack door inner panel, transfer the original USB/BAT control board to the new panel, and reassemble the pack.

Pictures in the listing are provided for reference. Installation requires removing one factory screw support and several small production tabs. This is easily accomplished with a pair of pliers by carefully snapping off the unwanted plastic, as shown in the photos.

Features

• Designed specifically for the Hasbro 1984 Proton Pack
• Accommodates a 3000mAh TalentCell battery pack
• Reuses the factory USB/BAT selector switch assembly
• Clean, finished appearance inside the snack door compartment
• Simple modification using original components
• Optimized for FDM 3D printing
• No permanent external modifications required

Recommended USB Cable

USB cable used during development:

https://amzn.to/4v5avVd

Included

• (1) Snack Door Inner Panel STL file

Important

• This is a digital download. No physical item will be shipped.
• Proton pack, battery, electronics, hardware, and USB cable shown in the photos are for demonstration purposes only and are not included.
• Pictures in the listing are for reference only.
• Minor fitting or sanding may be required depending on your printer and print settings.
• Installation requires removing one factory screw support and several small plastic tabs from the stock pack.

Disclaimer

Installation of this file requires partial disassembly and modification of the Hasbro Proton Pack. It is assumed that the end user possesses a reasonable level of mechanical aptitude and experience working with prop electronics and assemblies.

By downloading, accessing, printing, or using these files, you acknowledge and agree to abide by the License Agreement and Terms of Service included with the download. If you do not agree to these terms, do not download, print, or use the files.

The user accepts full responsibility for installation and use. Right Coast Props and Right Coast Creative LLC assume no liability for any damage to the proton pack, electronics, batteries, printed parts, property, personal injury, or any other loss, claim, or expense arising from the use, misuse, assembly, modification, installation, or inability to use these files or any printed parts derived from them.

Pictures shown are for reference purposes only. Installation requires removal of one factory screw support and several small production tabs. It is the responsibility of the end user to perform all modifications safely and correctly.

Use at your own risk.

License Notice

© Right Coast Creative LLC / Right Coast Props

By downloading this file, you agree to comply with the License Agreement and Terms of Service included with the download package. This STL file is licensed for personal, non-commercial use only. Redistribution, resale, sharing, uploading, or commercial use of the file or printed parts is prohibited without prior written permission from Right Coast Creative LLC.

Use at your own risk.